CyberPowerDiscontinued UPS

CyberPower Intelligent LCD CP1500AVRLCD

This discontinued 1500 VA unit uses simulated sine wave on battery. It is officially hot-swappable, and the correct cartridge is either RB1290X2 or RB1280X2A, depending on the serial number.

Status. CyberPower’s official product page marks the CP1500AVRLCD discontinued. Official replacement cartridges are still listed, and they depend on the serial-number prefix.

Official replacement cartridge

RB1290X2

Official SKURB1290X2
When to use this kitOfficial cartridge when the UPS serial number begins with CTH or CXE
Voltage12 V (each); two batteries in the cartridge
Capacity9 Ah (each)
TypeSealed lead-acid
Batteries in the official cartridge2
Cartridge quantity1
Cartridge warranty18 months

Official RB1290X2 product page

RB1280X2A

Official SKURB1280X2A
When to use this kitOfficial cartridge when the UPS serial number begins with CPT or CPA
Voltage12 V (each); two batteries in the cartridge
Capacity9 Ah (each)
TypeSealed lead-acid
Batteries in the official cartridge2
Cartridge quantity1
Cartridge warranty18 months

Official RB1280X2A product page

UPS specifications (from the official datasheet or product page)

Family / product nameCyberPower Intelligent LCD CP1500AVRLCD
VA rating1500 VA
Watt rating900 W
TopologyLine interactive
WaveformSimulated sine wave on battery (sine wave on AC)
Input voltage120 VAC nominal (90–142 VAC input range)
Form factorMini-tower
Outlets12 × NEMA 5-15R (6 battery + surge, 6 surge-only)
Transfer time4 ms typical
Typical recharge time8 hours (typical)
Runtime at half load12 minutes at half load
Runtime at full load3 minutes at full load
User-replaceable batteryYes
Hot-swappableYes
UPS warranty (as published)3-year warranty, including coverage of batteries; $500,000 Connected Equipment Guarantee

Related models

How to replace the battery

Unlike the CP1500PFCLCD, this model is officially hot-swappable. The official cartridge still depends on the serial-number prefix, and it is not the same as the PFCLCD’s RB1280X2B kit.

  1. Find the serial number and match the prefix: CTH or CXE → RB1290X2; CPT or CPA → RB1280X2A.
  2. Read the instructions packed with the official cartridge. If you are not comfortable changing a battery on a live UPS, shut it down and unplug it first.
  3. Install the complete official cartridge. CyberPower ships reusable packaging for recycling.
  4. Allow the official typical 8-hour recharge before judging runtime.

These are orientation steps, not a substitute for the manufacturer’s instruction sheet. Lead-acid UPS batteries can present electrical and chemical hazards.

Warranty considerations

Genuine vs third-party packs. This guide lists only the official manufacturer cartridge. Third-party kits are widely sold, but this site does not verify their dimensions, runtime, or safety against the OEM specification. Schneider Electric’s FAQ on genuine APC RBCs states that a non-APC battery may result in lower runtime, damage the UPS, create hazardous conditions, or void safety certifications, and that it will void APC’s Equipment Protection Policy. If you still consider an aftermarket pack, treat voltage, capacity, and physical fit as necessary starting points — not as proof of compatibility — and expect warranty terms to change.

When to replace the whole UPS instead

Where to buy (affiliate placeholders)

These are ordinary search links, not tracked affiliate tags. When a program is joined, replace the href and keep the data-affiliate attribute.

Search Amazon for CyberPower RB1280X2A Affiliate placeholderSearch eBay for CyberPower RB1290X2 RB1280X2A Affiliate placeholder

Affiliate disclosure

FAQ

Which battery do I buy for a CP1500AVRLCD?

Use the serial-number prefix. The official product page lists RB1290X2 for serial numbers beginning with CTH or CXE, and RB1280X2A for serial numbers beginning with CPT or CPA.

Is this the same battery as the CP1500PFCLCD?

Not necessarily. Both models can use RB1290X2, but only with the serial prefixes listed for that model. The other official kits are different: RB1280X2A on this model, RB1280X2B on the CP1500PFCLCD.

Is the output a pure sine wave?

No. The official page specifies simulated sine wave on battery. If you need sine-wave output for active-PFC equipment, look at CyberPower’s PFC Sinewave series instead.

Sources